Project description
Mike’s project was the Floor Plates (2.5Mx1.2Mx0.012M ) with Threading cylinder Inserts welded.
At first, Mike wanted to machining with laser cutting, after several technical meetings with our engineer, we found that there would be some problems.

Problems
1) The rough cutting holes, which will cause the cylinder Inserts inclined or hard to insert into the plates;
2) The connection between plates and plates would have gap because of the rough edges;

Our suggestions
Machining by Planer Milling Machine, which the biggest size can be machined is: 3M(L) x1.8M(W) x0.5M (T)

Mike agreed with our suggestions, and then result shows quite good . Now our cooperation is more and more, we become their reliable machining supplier in Shenzhen China.

Project description
Jack’s project was a Mechanical Linkage set.
Firstly we made a prototype for him as per his drawings required, but we found some problems.

Problems
1) There was no linkage effect.
2) The tube were loose even though all bolts are very tightly, also up and down plate had big gap .
After researching the drawings with the prototype, we got the solution as follow

Solution
1) The hook was too short to connect the shaft —-enlarge the hook length(3.5mm) to make sure it can connect the shaft correctly
2)The tube increase the process of Knurling and reduce outer diameter then it will be tightly and there is no gap between the plates.

Jack ordered 500 sets of Linkage Set after solved the problem , all of the parts worked well .
We are happy that helped Jack shorten the time for new products to appear on the market.

Aluminum Bow Riser is one part of our business for 8 years already and we are authored Bow Riser manufacturer of Chinese Archery Association.

Hussam is an Archery coach and own a Archery club. He got in touched with us and started from a 25’’ Recurve Bow Riser, now his 23’’, 25’’ and 27’’ Risers all made by us.

Mr. Ely from US and in CCTV Camera industry for 8 years .

As his camera housing demand is large, in order to save cost we find a solution that extrusion the out frame And CNC machining .